Showing posts with label Cat5e. Show all posts
Showing posts with label Cat5e. Show all posts

Network cable speed recognition and what type of network cable do you need in which case


There are plenty of networking opportunities and network cables available. But there are so many types of network cables that it's difficult to know witch type of network cable you exactly need.

Witch network cable do I need?
If you want to work with Cat5e and Cat6 than you need a 1000 Mbps network switch (Ethernet Switch) for a remarkable improvement in the throughput of the data. Several network cables with category Cat5 connection to a 1000 Mbit switch goes also. For example, with 10 PCs connected to a network with Cat5 network cables you can get maximum speed of 100 Mbits 1 computer can still reach there maxiumum speed of the 1000 Mbit swich.

A 1 GB network that does not mean there goes 1GB over the cable, but the data goes in pairs added together,250 MB in 1 pair.

Types of data speeds of network cable
Cat4 10 MBit = 1,25 MByte
Cat5 100 MBit = 12,5 MByte
Cat5e 150 MBit = 18,75 MByte
Cat6 250 MBit = 31,25 Mbyte

On this site you can calculate from Megabytes to MBits and vise versa:
http://www.easycalculation.com/bandwidth-calculator.php

Specifications of network cables
UTP: Unshielded Twisted Pair, the normal network cables.
STP: Shielded Twisted Pair, network cables for in noisy environment.

With Cat5 you have UTP and FTP cables. If you aren't routing the cable along power cables, transformers, fluorescent fixture, etc. than you can use UTP cable. Otherwise you have FTP and FTP cable connectors. In FTP, the equipment must also support FTP. In FTP, the wires and the cable is shielded. The veins of Cat6 cables are always shielded. Cat6 cables are much more expensive. In CAT4 you often see that there are only 2 pairs, 4 threads can be used. Cat4 2 pairs are also used for the transmission of the signals. Cat5 also send the data in 2 pairs. In Cat5e all 4 pairs are used.

Conditions for network cabling 
The cable can't be longer than 7 meters from the connection to the computer..
The (thicker) network cable between the 2 connection boxes is allowed up to maximum 100 meters.

What are Cross linked network cables?
Cross linked cables are used to connect 2 computers with each other without using a hub or router to connect with. These network cables are not suitable for network connections.

This applies to all types of straight network cables. Whether it's CAT4, 5, 5e or 6. Doesn't matter if it are UTP or STP cables. Cross-link cables are in most cases not work unless you have a special NIC that can switch itself (as in certain IBM notebooks). From Cat5 you can not extend the cables with coupling connectors to use patch cables.

The future: Cat7
There is a Cat7 network cable in development.

These cables would theoretically transfer data of 10GB.
These aren't yet fully developed so fiber optic cables are currently the only good solution for such data rates.

Netwerkkabel snelheden herkennen en wanneer heb je welke netwerkkabel nodig

Er zijn tal van netwerkmogelijkheden en netwerkkabels voorradig. Maar er zijn tal van soorten netwerkkabels waardoor men soms 'het bos door de bomen niet meer ziet' of beter gezegd 'de juist kabels niet meer vindt in het groot assortiment'.

Welke netwerkkabel heb je wanneer nodig?
Als je met Cat5e en Cat6 wil werken heb je een 1000 MBit netwerk switch (Ethernetswitch) nodig om een opmerkelijke verbetering van de doorvoersnelheid van de data waar te nemen. Meerdere netwerkkabels met een categorie Cat5 aansluiten op een 1000 Mbit switch gaat natuurlijk ook. Bijvoorbeeld door 10 PC’s aan te sluiten op een netwerk met netwerkkabels Cat5 kun je de maximale snelheid van 100 Mbits per computer nog altijd behalen daar je een swich hebt van 1000 Mbit.

Bij een 1 GB netwerk betekend het niet dat er 1GB over de kabel gaat, maar over de paren bij elkaar opgeteld. Per paar 250 MB.

Type data doorvoeren van netwerkkabels
Cat4 10 MBit = 1,25 MByte
Cat5 100 MBit = 12,5 MByte
Cat5e 150 MBit = 18,75 MByte
Cat6 250 MBit = 31,25 Mbyte

Op de onderstaande calculator kun je Megabytes omrekenen in MBits en omgekeerd:
http://www.easycalculation.com/bandwidth-calculator.php

Eigenschappen van netwerkkabels
UTP: Unshielded Twisted Pair, de normale netwerkkabels.
STP: Shielded Twisted Pair, netwerkkabel voor in storingsgevoelige omgeving.

Bij Cat5 heb je UTP en FTP kabels. Wanneer je de kabel niet langs voedingskabels, trafo's, tl armatuur, etc. legt, mag je UTP kabel gebruiken. Anders moet je FTP kabel en ook FTP connectoren gebruiken. Bij FTP moet de apparatuur ook de FTP ondersteunen. Bij FTP zijn de aders en de kabel afgeschermd. Bij Cat6 zijn altijd de aders en de kabel afgeschermd. Cat6 kabels zijn veel duurder. Bij Cat4 zie je vaak dat er maar 2 paren, 4 draden, gebruikt worden. Bij Cat4 wordt ook maar 2 paren gebruikt voor de transmissie van de signalen. Ook bij Cat5 wordt het signaal over 2 paren gestuurd. Bij Cat5e worden alle 4 de paren gebruikt.

Voorwaarden bij netwerkbekabeling 
De kabel mag vanaf de aansluiting tot de computer niet langer zijn dan 7 meter.
De (dikkere) netwerkkabel die tussen de 2 aansluitdozen zit mag maximaal 100 meter zijn.

Wat zijn Cross netwerk kabels?
Cross kabels zijn om 2 computers zonder tussenkomst van een HUB of router met elkaar te kunnen verbinden en zijn dus niet geschikt voor netwerk verbindingen.

Dit geldt voor alle typen straight netwerkkabels. Maakt niet uit of dit Cat4, 5, 5e of 6 is. Maakt ook niet uit als het UTP of STP kabels zijn. Cross-link kabels gaan in de meeste gevallen niet werken, tenzij je een speciale netwerkkaart hebt die zelf kan switchen (zoals in bepaalde IBM notebooks). Vanaf Cat5 mag je geen koppelconnectoren gebruiken om patchkabels te verlengen.

De toekomst: Cat7
Men is bezig met de ontwikkeling van Cat7 netwerk kabels.
Deze kabels zouden theoretisch 10 GB aan data kunnen transporteren.
Deze staan nog niet op punt dus zijn glasvezel kabels momenteel de enige goede oplossing voor dergelijke data snelheden.
Copyright: byWM